Micromax Nitro 2 E311 Flash Stock Rom Using SP Flash Tools
Requirements:
- Phone should have 50-60% battery left before flashing.
- Make sure you have updated & installed the latest drivers before flashing.
- Windows laptop or pc and micro usb cable
Steps:
1. Extract the downloaded zip file2. Install the drivers provided in zip file above
3. Switch off your smartphone, remove the battery
4. Open SP Flash tools provided in the zip file, click on scatter loading now add the scatter file which is there in firmware folder of the downloaded zip file
5.Now click on download button & connect the smartphone to pc via usb cable without battery (Note.Connect the smartphone in 4-5 secs after clicking on download button)
6.If drivers have been installed properly the flashing process will start with red line, violet line & yellow line which will take about 10-15 mins don't disconnect until it shows download complete!